Mon, 15 Mar 2010 06:45:08 +0000 editor@atariage.com (AtariAge Forums) IP.Blog 60 http://www.atariage.com/forums/blog/355/entry-6900-firmware-v111/
a new Firmware is available for download.

1.11:

- fix write and read bug with 93C46 from manufacturer CSI (S/N: 18 / 54-58 / 64 / 74-xx)
- improve erase count routine for 93C46
- bug fix sometimes red status LED do not switch off after verify failt
- bug fix using green LEDs while verify
- optimize erase and time out routine for erasing Flash Memory

All FlashCards shipped out after 14th March 2010 will be delivered with this Firmware.

Attached you can find the Firmware file and the manual in english and german.

Thatīs all for today.

Kind Regards

Lynxman]]> Mon, 15 Mar 2010 05:55:00 +0000 http://www.atariage.com/forums/blog/355/entry-6900-firmware-v111/ http://www.atariage.com/forums/blog/355/entry-6897-technical-information-hardware-firmware/ Technical:

List of FlashCard versions:

Hardware:

1st & 2nd run:

PCB V1.271

3rd run: (20th anniversary limited edition - little Demo added - only 20 pcs produced)

PCB V1.3a4 (changed layout with additional Pads for 8KB EEPROM for the Demo)

4th run:

PCB V1.276 (improved for faster soldering, changed some pads and position of resistors, changed LEDs)


Firmware:

The actual Firmware is V1.11 with Language set V1.21a.
This Firmware runs with all Board 1 FlashCards. (all FlashCards until now)
The only functional difference is the Demo. It will only be shown with the 3rd run FlashCards.

Firmware History:

1.01:
First released Firmware for the FlashCard. (1st and 2nd run FlashCards) - not available for download

1.10:

...]]> Sun, 14 Mar 2010 14:37:00 +0000 http://www.atariage.com/forums/blog/355/entry-6897-technical-information-hardware-firmware/