Jump to content
IGNORED

D.8002 HS (?)


drac030

Recommended Posts

Does anyone here know anything about such a disk drive:

 

http://atariki.krap.pl/index.php/D.8002_HS

 

It appeared some time ago on Allegro. One of Atarians here has bought it and made the photos - but nothing else is actually known, except that the drive apparently does not work in UltraSpeed or XF551 turbo modes. And the owner is currently hm, difficult to reach, so no information about what CPU is there, what is the drive capacity etc. is possible to get from him.

 

Any info appreciated.

Link to comment
Share on other sites

We don't know much about these markets but Atari's presence had to be big enough for a company to manufacture such disk drives...

 

The local market doesn't have to be very big.

 

A friend of mine and me started working in a similar project back on the day. The Atari market in our country was quite reduced. What made it still commertailly viable were two things.

 

One was the huge local retail price of Atari drives, they were already quite expensive FOB, and the high custom taxes made them unaffordable for most people here. OTOH PC drives were widely available at very low prices. So we could make DSDD drives much cheaper than importing a 1050.

 

The other one was that we were just two young people, not an established company that usually has no chances in small scale products.

Edited by ijor
Link to comment
Share on other sites

The local market doesn't have to be very big.

 

A friend of mine and me started working in a similar project back on the day. The Atari market in our country was quite reduced. What made it still commertailly viable were two things.

 

One was the huge local retail price of Atari drives, they were already quite expensive FOB, and the high custom taxes made them unaffordable for most people here. OTOH PC drives were widely available at very low prices. So we could make DSDD drives much cheaper than importing a 1050.

 

The other one was that we were just two young people, not an established company that usually has no chances in small scale products.

I didn't know you worked on such a project...

 

Fact is all the known Atari floppy disk drives (at least the ones in the FAQ) are from either the US, Germany or Poland, all big markets. IMO, the two company logos on the disk drive (IAI and SBG Ltd.) are signs that this was a pretty serious venture.

 

--

Atari Frog

http://www.atarimania.com

Link to comment
Share on other sites

I didn't know you worked on such a project...

 

We never finished it, don't remember exactly why. Possibly because the XF-551 arrived, and then our product wouldn't have such a big competitive advantage. Or may be was something else, don't really remember. I don't even remember how far we reached. I should have the firmware sources somewhere.

 

Fact is all the known Atari floppy disk drives (at least the ones in the FAQ) are from either the US, Germany or Poland, all big markets

 

As I said, we never finished the drive. But there were several other local products that reached the market, some I was involved other I was not. Some I remember are Printer Interface, standard Tape player interface, etc.

 

I wouldn't be suprised if similar products were developed and manufactured in other third world countries. Not because of the big market, but because of the demand of replacing imported (and hence, very expensive) products.

 

IMO, the two company logos on the disk drive (IAI and SBG Ltd.) are signs that this was a pretty serious venture.

 

May be. I didn't mean specifically about this drive. I was just commenting that local production was done also in small markets for the reasons mentioned above.

Link to comment
Share on other sites

Fact is all the known Atari floppy disk drives (at least the ones in the FAQ) are from either the US, Germany or Poland, all big markets. IMO, the two company logos on the disk drive (IAI and SBG Ltd.) are signs that this was a pretty serious venture.

Even here in Czech Republic were at least two floppy drive projects. Here are photos of one of them the VD40.

 

post-2769-1167765698_thumb.jpgpost-2769-1167765719_thumb.jpgpost-2769-1167765736_thumb.jpg

Edited by krupkaj
Link to comment
Share on other sites

No, there was series of VD40 manufactured in Flop in Roznov and in Brno, This drive is XF551 compatible and has centronix port.

 

There was other project called Spider. Unfortunately this one was only prototype. Main problem was lack of WD chips. I have one of prototype pcb somewhere, I can make photo of of this if you want.

Edited by krupkaj
Link to comment
Share on other sites

Could you post some more information about technical characteristics of the VD40 drive? I.e.:

 

* the actual official name (you call it VD40, on the photo i see "VD40 F"?)

* the microprocessor used, the amount of RAM and ROM inside the drive

* is the drive programmable; if so, detailed information welcome

* supported densities

* supported baud rates, if anything above 19200

* supported turbo protocols, if any

* rotation speed

* who, where and when designed and built

* how many units were produced / sold

* any other interesting stuff about it, if any

* a nice, sharp, high resolution photo is welcome

 

Thanks

Edited by drac030
Link to comment
Share on other sites

So here is some info about VD 40

The drive was developped in Viatronic Brno under name VD 40. It was later manufactured under licence in Flop Roznov pod Radhostem as VD 40 F.

There is Toshiba 8085 CPU and WD2797A-PL floppy controller. It use 6264 8K static RAM and 2764 8K EPROM and 8155 for printer port. It use standard 360k PC floppy drive.

The drive is XF551 compatible and supports all its densities and speed.

I do not know how many drives were produced. There is serial number 57 so I think there were about hundred from both producer, but do not take this number so seriously. I will try to find out more.

Here are some photos. In the last two picttures there is other case which was used for this drive. It is the same case as for floppy drive for ZX spectrum which was also produced in Czech. But it is only a case I have put the floppy drive it. As you see there are no connectors on the rear side.

 

post-2769-1168122422_thumb.jpgpost-2769-1168122497_thumb.jpgpost-2769-1168122605_thumb.jpgpost-2769-1168122669_thumb.jpgpost-2769-1168122698_thumb.jpgpost-2769-1168122741_thumb.jpgpost-2769-1168122969_thumb.jpgpost-2769-1168122770_thumb.jpg

Edited by krupkaj
Link to comment
Share on other sites

  • 3 months later...

I have got Spider finally. I have not tried it yet, but here are some photos for anyone who is interested. Basicaly it is clone of XF551 plus centronics port.

Unfortunately due to shortage of WD chips only 70 pieces was made.

post-2769-1178358365_thumb.jpgpost-2769-1178358468_thumb.jpgpost-2769-1178358522_thumb.jpgpost-2769-1178358628_thumb.jpg

Link to comment
Share on other sites

I seem to remember that derek firn/fern (c/o microdiscount) did a couple of free standing floppy boards one was for 360k drive mechs (i'm assuming it was a percom clone/rip off) and also a smaller floppy board for 720k and 1.44 meg drive mechs (as per the 360k drive mech floppy board)

 

Apparently he was planning to do a version of the larger cap. floppy board that was hard drive compatible

 

Also a few years before derek fern/firn did his floppyboard, a london atari specialist called 'computerhouse UK' (of o/s controllercard fame) also did a couple of floppyboard where you could attach st/amiga external oir internal floppy drive to an A8...never saw one though

Link to comment
Share on other sites

  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...