As i remember you have to click something to send files please give me copy of real term i lost mine..
I will run file and see if i cant use null modem and get it to send files...
2
BURNING ROMS TO EEPROMS
Started by awace, Mar 14 2009 7:46 AM
33 replies to this topic
#27 OFFLINE
twolazy
-
-
- 11 posts
Space Invader
Posted Sat Oct 24, 2009 3:05 PM
Actually I'll do one step even better and mail you a paper copy and cd if you wish, just PM me your address. Wouldn't cost much more to mail, and I'll just print it out at work! Heh. 
BTW here's a direct download link to realterm - http://sourceforge.n...?group_id=67297
You want the top link, Realterm_2.0.0.57_setup.exe
Great thing about this program is that you can easily make front end loaders for it! It supports scripting and activeX commands. So with a little work should be a great replacement for the OEM software, while being able to work in any windows/linux os!
I was thinking that after we have these machines up and running, and everything is golden, to create a yahoo project or similar for it. That way all this knowledge is archived for others who can't find a single piece of info on these great burners. Such a shame logical devices decided to just abandon any support.
BTW here's a direct download link to realterm - http://sourceforge.n...?group_id=67297
You want the top link, Realterm_2.0.0.57_setup.exe
Great thing about this program is that you can easily make front end loaders for it! It supports scripting and activeX commands. So with a little work should be a great replacement for the OEM software, while being able to work in any windows/linux os!
I was thinking that after we have these machines up and running, and everything is golden, to create a yahoo project or similar for it. That way all this knowledge is archived for others who can't find a single piece of info on these great burners. Such a shame logical devices decided to just abandon any support.
Edited by twolazy, Sat Oct 24, 2009 3:35 PM.
#29 OFFLINE
awace
-
-
- 444 posts
Moonsweeper
- Location:MN,USA
Posted Wed Nov 4, 2009 2:39 AM
I just rememberd you need a null modem cable and use xmodem I think hyperterminal would work..
the realterm works better though..
I just blew my big computer motherboard NEVER PLUG IDE CABLES IN WHEN POWER IS ON unless you have the bottom of the motherboard taped off w electrical tape..
anyway use 7,1,none and use null modem cable and xmodem(crc) to send files to burner...
send them in hex format and use the bin2hex file to convert them then put burner into intel hex mode then once file loaded you can burn to chip.. remember to check if blank 1st..
the realterm works better though..
I just blew my big computer motherboard NEVER PLUG IDE CABLES IN WHEN POWER IS ON unless you have the bottom of the motherboard taped off w electrical tape..
anyway use 7,1,none and use null modem cable and xmodem(crc) to send files to burner...
send them in hex format and use the bin2hex file to convert them then put burner into intel hex mode then once file loaded you can burn to chip.. remember to check if blank 1st..
#30 OFFLINE
S1500
-
-
- 2,148 posts
River Patroller
- STATUS UNDER LITIGATION FROM ATARI
- Location:Twin Cities
Posted Wed Nov 4, 2009 7:31 AM
I am completely lost on what is being discussed in this thread. More paragraph breaks, less crack pipe.
#31 OFFLINE
twolazy
-
-
- 11 posts
Space Invader
Posted Wed Nov 4, 2009 10:49 AM
Sorry to hear about your misfortune.
Well I did manage eventually to get it to upload and download. Problem is now, whatever I download, doesn't upload with the same CRC. I am thinking perhaps its my usb to serial adapter. This weekend i'll attach it to my IBM XT and use an old verison of procomm plus and try again. So close atm!
I managed to upload and download using ASCII hex file transfer w/ the terminal I posted earlier. I tried xmodem a few times and no luck. I am beginning to wonder if perhaps its xmodem-1k? Or maybe its just the fact my digelec machine has 64k ram and i'm trying to upload 181kb for a 27c256. Not quite sure what I am doing wrong here. Do you know if you have to span files to ram size? Beginning to wonder if that is what I am doing wrong here...
If I can't get it here in the next few weeks, I am just going to buy a willem programmer and be done with it. I was hoping this be easier to transfer files too.
Well I did manage eventually to get it to upload and download. Problem is now, whatever I download, doesn't upload with the same CRC. I am thinking perhaps its my usb to serial adapter. This weekend i'll attach it to my IBM XT and use an old verison of procomm plus and try again. So close atm!
I managed to upload and download using ASCII hex file transfer w/ the terminal I posted earlier. I tried xmodem a few times and no luck. I am beginning to wonder if perhaps its xmodem-1k? Or maybe its just the fact my digelec machine has 64k ram and i'm trying to upload 181kb for a 27c256. Not quite sure what I am doing wrong here. Do you know if you have to span files to ram size? Beginning to wonder if that is what I am doing wrong here...
If I can't get it here in the next few weeks, I am just going to buy a willem programmer and be done with it. I was hoping this be easier to transfer files too.
Edited by twolazy, Wed Nov 4, 2009 10:52 AM.
#32 OFFLINE
awace
-
-
- 444 posts
Moonsweeper
- Location:MN,USA
Posted Tue Apr 6, 2010 10:56 PM
null modem !xmodem
#33 OFFLINE
awace
-
-
- 444 posts
Moonsweeper
- Location:MN,USA
Posted Tue Apr 6, 2010 10:59 PM
twolazy, on Wed Nov 4, 2009 10:49 AM, said:
Sorry to hear about your misfortune.
Well I did manage eventually to get it to upload and download. Problem is now, whatever I download, doesn't upload with the same CRC. I am thinking perhaps its my usb to serial adapter. This weekend i'll attach it to my IBM XT and use an old verison of procomm plus and try again. So close atm!
I managed to upload and download using ASCII hex file transfer w/ the terminal I posted earlier. I tried xmodem a few times and no luck. I am beginning to wonder if perhaps its xmodem-1k? Or maybe its just the fact my digelec machine has 64k ram and i'm trying to upload 181kb for a 27c256. Not quite sure what I am doing wrong here. Do you know if you have to span files to ram size? Beginning to wonder if that is what I am doing wrong here...
If I can't get it here in the next few weeks, I am just going to buy a willem programmer and be done with it. I was hoping this be easier to transfer files too.
Well I did manage eventually to get it to upload and download. Problem is now, whatever I download, doesn't upload with the same CRC. I am thinking perhaps its my usb to serial adapter. This weekend i'll attach it to my IBM XT and use an old verison of procomm plus and try again. So close atm!
I managed to upload and download using ASCII hex file transfer w/ the terminal I posted earlier. I tried xmodem a few times and no luck. I am beginning to wonder if perhaps its xmodem-1k? Or maybe its just the fact my digelec machine has 64k ram and i'm trying to upload 181kb for a 27c256. Not quite sure what I am doing wrong here. Do you know if you have to span files to ram size? Beginning to wonder if that is what I am doing wrong here...
If I can't get it here in the next few weeks, I am just going to buy a willem programmer and be done with it. I was hoping this be easier to transfer files too.
#34 OFFLINE
awace
-
-
- 444 posts
Moonsweeper
- Location:MN,USA
Posted Wed Jul 7, 2010 11:11 PM
WOW wholly crap BOY did I rant on on that topic ...
anyway I eventually found a appolo cart with a 2732 in it and using a william eeprom burner I finnaly made some new homebrew carts I actually burned and got them to work I also using a ohm meter I pinned out the cart and using a old atari pac-man cart I rewired it to use a 7400 and a 2732 to use 4k roms i hacked...
anyway I eventually found a appolo cart with a 2732 in it and using a william eeprom burner I finnaly made some new homebrew carts I actually burned and got them to work I also using a ohm meter I pinned out the cart and using a old atari pac-man cart I rewired it to use a 7400 and a 2732 to use 4k roms i hacked...
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
