The 600 XL gives only a red screen after "Power ON". Pressing any key has now effect. I use the original power adaptor. The antenna-cable was missing, i use a standad 2600 jr. cable...
0
Dead Atari 600XL PAL from ebay
Started by Mister VCS, Mar 16 2010 12:17 PM
1 reply to this topic
#1 OFFLINE
Mister VCS
-
-
- 1,047 posts
Stargunner
- Location:@!#?@ Germany
Posted Tue Mar 16, 2010 12:17 PM
#2 OFFLINE
mimo
-
-
- 6,084 posts
Preppie!
- It's easy living in a bubble
Posted Tue Mar 16, 2010 4:48 PM
this problem is discussed a lot in the 8bit forums and you may find some more help there.
First I would check that the PSU is ok, if you can try the system with another PSU that would be great. Next open her up and remove/clean/re install all the socketed chips (pretty much all of them on a 600)
If you are still having problems, replace the 2 ram chips, CPU, and MMU in that order, after that I have no idea.
I will say that I have bought back at least 5 XL/XE machines from the grave by doing the above
First I would check that the PSU is ok, if you can try the system with another PSU that would be great. Next open her up and remove/clean/re install all the socketed chips (pretty much all of them on a 600)
If you are still having problems, replace the 2 ram chips, CPU, and MMU in that order, after that I have no idea.
I will say that I have bought back at least 5 XL/XE machines from the grave by doing the above
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
