theloon, on Fri Jul 30, 2010 3:39 PM, said:
Hyper_Eye, on Thu Jul 29, 2010 7:30 PM, said:
theloon, on Thu Jul 29, 2010 6:59 AM, said:
I've had 2 XBunk 360s fry so far. PS3 makes loud fan noises but still works as I bought it (until I'm forced to upgrade to the no Linux bull).
I don't understand, really. Back in the day the Atari and Intellivision would literally melt the shag carpet before quitting.
I think it is funny that someone posted about their PS3 dying and the first response is someone trashing the 360, calling it names, and making sure to note their PS3 is working. It's okay! He wasn't dogging the PS3. He wanted to play it and he is sad it broke! I also didn't see anything in the OP in reference to the 360. To the OP, sorry your console broke. No matter the console it is a major disappointment when it fails.
Is this the console PS3 vs. 360 flame wars I've heard about? I'm sorry if I touched a nerve. I think BOTH suck compared to my older consoles. No Sony Fanboy or Micro-softie here! My point was this generation consoles seem to overheat and die. I'm not thrilled to hear a fellow AtariAge member having his PS3 die as it doesn't bode well for me either.
Again, didn't want to start a flame war. I realized it's a touchy subject and still posted my experiences anyway. Sorry.
have you ever looked at the state of the thermal paste you know it dries up with in 1 year to 6 months the ps3 i got was almost comepletely dried up..
its completely worth removing the warrenty sticker to replace the thermal paste..
you know on youre IBM compatible machine you check the thermal paste when it locks up or the c-mos battery whell the ps3 has 2 cpus huge ones really big and they have HUGE heat sinks otherwise it looks like a laptop w lots of memmory sticks built in other than the thermal paste and the 2032 battery witch could short out and make it shluggish and over heat check the thermal paste..
on a OLD xbox i seen a n610c compaq type cpu used and was able to replace the heat synk sticker crap... i would have just wanted to use the white paste sony used on the ps3 I used up the last of my thermal paste on my ps3 and it hardly runs the fan I bet if youre ps3 over heats that mutch to run the fan full speed youre thermal paste is dried out..
USE PAPER towel remove all thermal paste from heat sink and cpus then use the white stuff try to get the biggest toothpaste tube type thermal paste avalible cause the more the better I ran out so now when my regular computer over heats I have to get more..
for $4.00 its better than sending it to sony and its always better to do preventive maintnence before you see a yellow death light..
I hope mine doesnt do that as it would suck no more linux..
oh I alsomost for got..
PS
one day in 198? something 1985 i think I light ning storm came along and OF COURSE the atari was on
my dad told me once the electric bill is on a budget $150 a month or something like that it stays the same so i could just leave the atari on all the time I forgot to unplug the disk drive the 850 interface module and the modem DAMN anyway lightning blew up the disk drive the 850 interface module and the satellite reciver
the satellite splitter and the honeywell alarm panel all blew up
but the good old ATARI800 said READY it took a nother 10 years for the power supply to finnaly take a crap it still works but it stinks really bad now so i just replaced the power supply but it just goes to show they dont make stuff like they used to...
AT LEAST sony made it easy to get to the heat sink and didnt make it like MICROSOFT with those crappy bandaid crap heat stink stickers witch suck..
I like the huge fan they used too.. .
also i remembered if you turn it on pushing both power and eject the fan runs full speed.. dont know what that is for..
probably to test the fan.
anyway all good luck keeping youre stuff cool..
oh before I forget..
my n610c Compaq laptop is great EXEPT
1 the heatsynk is fan mounted UPSIDE DOWN lame
2 the harddrive is directly underneeth the ati chipset and the northgate witch DONOT HAVE HEATSINKS lame and stupid
the only good thing is it actally has white heatsink paste
3 the lame thing is the thing if you put a 2.4 Ghz cpu in it forget it it will literally start a fire..
4 i downgraded to a 1.7 Ghz cause a 2.0 is to hot..
5 my harddrive used to show temprature in speed fan
6 speed fan could use a mod to make it change speeds by it self so you could run fan fullspeed
7 the harddrive temp seems to be stuck at 300'F wow whooly crap
8 i did get it up to 150'F once But i started to smell solder melting on the back side of the harddrive and said hmm time to let it cool down for a while..
9 playing UT 2003 goty will only allow 1 hour of play time before getting to over 166'F .
10 at least you can just pull the harddrive out and put in freezer for 1˝ hour..
11 the only good thing about the n610c is its 1400x1050 screen its awesome i just wish i could find a nother laptop w same screen.
12 why is it that noone has a laptop w screen more than 720??? lame .
13 im now wondering if i should shut the ps3 off or is it like the laptop when not running ut2003 type games it probably wont matter
15 oh i forgot i think found a quake2 for power pc ps3 verison i think im going to try that.
I did get atari2600 emulation working on ps3 and linux ubuntu 9.10 using piteteboot..