I received a free PC Engine Duo-RX controller as part of a purchase this week, but it acts as though the left direction is always being pushed. I took the pad apart and took the PCB out so that nothing was touching the contacts, but it is still doing it. I'm going to use a magnifying glass and a multimeter to check for shorts when I get home, but is it possible that the encoder chip (or whatever it's called) is hosed? I hope it isn't because I would really like to be able to use this controller.
Chris
0
Malfunctioning controller
Started by Jibbajaba, Apr 13 2011 1:25 PM
1 reply to this topic
#1 OFFLINE
Jibbajaba
-
-
- 3,215 posts
River Patroller
- Location:112 1/2 Beacon St.
Posted Wed Apr 13, 2011 1:25 PM
#2 OFFLINE
Jibbajaba
-
-
- 3,215 posts
River Patroller
- Location:112 1/2 Beacon St.
Posted Tue Apr 19, 2011 8:50 AM
Solved the problem. The contacts under the 2-6 button switch were dirty, and the controller acts as I described when you play 2-button games in 6-button mode. So I'm just posting this in case anyone else has the same problem and finds this thread after searching the forums.
Chris
Chris
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
