2 replies to this topic

[rdangela]

Hello All, I am looking to see if if someone might have some info that may help me solve this issue, I did a forum search and nothing came up.

I have a Atari 5200 2 port, for whatever reason the machine will not accept any input from the controllers, basically I can press every button the controller and nothing will happen on the screen any help or suggestions on what might be causing this would be great

I also have a 4 port 5200 and 3 controllers, all 3 controllers work great on my 4 port, so I can rule out the controllers being the issue

thanks
Randy

[zylon]

Port could be bad, board could be cracked, chip issue. Could be any of those.

[amiman99]

I had 1 port bad in mine, the joystick would always go left-right, but no up-down. So, the story goes, the chip that controls the input is the POKEY chip according to the schematics. I got one POKEY chip from Ballblazers for A7800. De soldered the chip from cartridge and replace it in Atari 5200.