hi guys does anyone have a plan on how to put a db9 on a coleco controller (the stick on the controller is broken so i removed it) i would like to put a db9 port instead (a la ''champ'' pad)
1
DB9 port on coleco controller
Started by harlock76, Sep 4 2011 1:49 AM
2 replies to this topic
#2 OFFLINE
Yurkie
-
-
- 2,444 posts
Q*bert Champion
- Offering ColecoVision repairs, refurbs and mods.
- Location:Toledo, Ohio
Posted Sun Sep 4, 2011 7:47 AM
Double post
Edited by Yurkie, Sun Sep 4, 2011 8:03 AM.
#3 OFFLINE
Yurkie
-
-
- 2,444 posts
Q*bert Champion
- Offering ColecoVision repairs, refurbs and mods.
- Location:Toledo, Ohio
Posted Sun Sep 4, 2011 8:01 AM
I thought about your post and reread it and I think your asking about putting a female DB9 in the controller housing.
I think it would be a lot of work, and even if you did a fantastic job on the jack install it would still look like crap, because of the fact it was broken.
Your best bet is a y-cord male that plugs into the coleco and 2 females on the other end... You can plug a controller in 1 and the broken controller to use as keypad in the other.
I think it would be a lot of work, and even if you did a fantastic job on the jack install it would still look like crap, because of the fact it was broken.
Your best bet is a y-cord male that plugs into the coleco and 2 females on the other end... You can plug a controller in 1 and the broken controller to use as keypad in the other.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
