I got a 5200 vcs adapter and it works.However,the fire button on all my controllers doesn't work with it.It goes in all directions and works,but the fire button doesn't.
Please help!
0
Vcs cartridge adapter issue
Started by 5200 Collector Dude, Oct 5 2011 12:02 AM
4 replies to this topic
#2 OFFLINE
OldSchoolRetroGamer
-
-
- 2,100 posts
River Patroller
- Location:CANADA
Posted Wed Oct 5, 2011 12:26 AM
Well if none of your controllers work with it (I assume they work on other systems) just a shot in the dark, are any of the port pins on the VCS adapter pushed in? Or worse yet missing or any type of problem?
#3 ONLINE
Official Ninja
-
-
- 1,562 posts
Stargunner
- Location:NJ
Posted Wed Oct 5, 2011 7:30 AM
Check with a meter for continuity from each pin in the port to the 1st point they end up on the board away from the port itself.
#4 OFFLINE
Curt Vendel
-
-
- 4,243 posts
River Patroller
- Location:Carmel, New York
Posted Wed Oct 5, 2011 9:02 AM
Its either a bad solder joint on the control port or one of the inputs on the RIOT is hosed and you'll need to replace the 6532.... more then likely it may just be a bad connection at the joystick port.
#5 OFFLINE
5200 Collector Dude
-
-
- 24 posts
Space Invader
Posted Wed Oct 5, 2011 6:43 PM
None seem to be pushed in,I'll try the second controller port soon and see if it has the same problem.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
