Ive never had a Wico command controller apart and am wondering if any one here has modded their controller to better suit a south paw ?
I'm either wanting to rotate it so the buttons are on the top or bottom right...
Hoping it is as easy as reversing clips as Ive done to my Comp Pro sticks to change fire buttons. ?
0
wico 5200 mods
Started by peedenmark7, Oct 31 2011 4:48 PM
2 replies to this topic
#2 OFFLINE
Sonic R
-
-
- 648 posts
Dragonstomper
- Location:Detroit, MI
Posted Mon Oct 31, 2011 7:50 PM
I'd be interested in this information too!
I have difficulty using my right hand for the stick… having the buttons on the right would allow me to use my left hand for the stick and right hand for button operations…
I have difficulty using my right hand for the stick… having the buttons on the right would allow me to use my left hand for the stick and right hand for button operations…
#3 OFFLINE
bohoki
-
-
- 886 posts
Dragonstomper
Posted Mon Oct 31, 2011 9:04 PM
if you can solder its not hard
it would be easier to keep the x/x the same so you will flip the stick and have the buttons be bottom right
all you have to do is open it up and the blue potentiometers you will spot they have 3 connector points leave the middle one alone and unsolder the one on one side and solder it to the opposite
it would be easier to keep the x/x the same so you will flip the stick and have the buttons be bottom right
all you have to do is open it up and the blue potentiometers you will spot they have 3 connector points leave the middle one alone and unsolder the one on one side and solder it to the opposite
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
