3 replies to this topic

[FND]

Ok just got this from the brother of John Danielson who had worked at Atari Coin Op Div in the early 80's in the printing department.
Apparently he worked there during the time they switched to a new printing process were they used Ultraviolet light to cure the paint
as I also picked up a full size side art panel from Asteroids Deluxe that was used as a color example in the print shop.

Anyway I am curious if anyone has any idea why they would print up these reduced size side art along with reduced size control panel
and attraction panel decals ? were they going to make a small bar top Tempest ? a sales man sample ? some sort of prize ? I have no
idea but it sure is cool

I got a set of three Attraction Panel decals
set of three Control panel decals (sadly two are damaged)
set of four side art panels (L & R per set)

Negative sets for each of the above items (each set has 6 negatives, 1 for each color)

Xerox copys of the Blue prints for
Decal Control panel with hand written notes on print saying Finished size of part after reduction 5.94" X 4.78"
Decal Attraction Panel with hand written notes on print saying Finished size of part 5.94" X 2.35" after reduction
Panel, Side Left & Right With Hand written notes on print saying Finished size of part 17.50" X 8.00" Negs are actual size just ???? into positive
Front Glass Monitor cover
Frame Attraction panel

Maybe I should build a 17.5 " Tempest with origianl art work

[jcleverly]

the marquee art is interesting, as this is the cooler irish art, rather than the US version. i know the side art on that picture is upright cab style art, but with the marquee art having the black frame around it, i'd guess that was for a cabaret tempest.

[Madaracs]

Could the control panel overlays be for a cocktail?

That marquee looks like the one they stuck on the cabaret--only it's too small.

I have no idea on the side art either since they were screened on the cabinets and there wasn't any side-art on the cabarets.

Cool stuff!

[FND]

This was some sort of mock up and they actually built one as I did find a small picture of it hidden in the paper workd
I had another thread going over at Game Gavel with much better pictures and close ups along with the small picture
I found, its shown in the #17 post at the link below

(in case you dont want to follow the link I added the picture and a copy and past of the forum post i had made when I found it)

http://www.gamegavel...29460#post29460


----- Copy Past from Game Gavel Post -------

Well it looks like they indeed did build at least one small model. Been going though
some of the other items I had gotten from this lot I found this old sadly very dark
Polaroid of one of the small Tempest models. its very hard to make out as its so
dark but you can see the angle of the shot is in the upward angle and there is
what looks like the edge of a table top at the bottom of the model ( looks like
the model is on top of a table ) it would be very hard to get this angle if the
tempest was standing on the floor also I dont see any cion door or slots.
Coincidentally it looks like this picture was taken sometime around holloween as I
think I can make out a Jack-a-Lantern about 2/3 of the way up the left side of
the picture

BTW The white marks at the bottom left side of the front of the Tempest in the
black area below were the Coin door would be is just lint on my scanner , in the
original picture it is totaly black

EDIT today 11-21-11
While looking at the picture below I notice it does not have the speaker
opening next to the "attraction Panel " at the top of the machine, and as you
can see in the picture and negatives of this sticker that I had gotten it was removed
and not included. this again seems to help show this picture is of a small 17.5" special
cab that was put together for some reason.