Hi:
A thought occurred to me while I was opening a 2600 cart and seeing if it could be retrofitted for a 7800...
Instead of making all new cases, couldn't just the inner flap that opens be made to accommodate the 7800 board? The outer dust cover that slides back need only have the two notches cut out (easy enough) for the wider 7800 board.
Would it be cheaper just to make that part? And then we can use 2600 cases again, and just replace the inner flap and cut the two notches out of the dust cover.
Thoughts?
Bob
1
A thought about creating new 7800 casings... (attn: Curt)
Started by PacManPlus, Nov 28 2011 5:24 PM
2 replies to this topic
#1 OFFLINE
PacManPlus
-
-
- 3,320 posts
River Patroller
- Location:Naples, Florida
Posted Mon Nov 28, 2011 5:24 PM
#2 OFFLINE
kenfused
-
-
- 1,192 posts
Stargunner
- Location:Columbus, Ohio
Posted Mon Nov 28, 2011 6:12 PM
PacManPlus, on Mon Nov 28, 2011 5:24 PM, said:
Hi:
A thought occurred to me while I was opening a 2600 cart and seeing if it could be retrofitted for a 7800...
Instead of making all new cases, couldn't just the inner flap that opens be made to accommodate the 7800 board? The outer dust cover that slides back need only have the two notches cut out (easy enough) for the wider 7800 board.
Would it be cheaper just to make that part? And then we can use 2600 cases again, and just replace the inner flap and cut the two notches out of the dust cover.
Thoughts?
Bob
A thought occurred to me while I was opening a 2600 cart and seeing if it could be retrofitted for a 7800...
Instead of making all new cases, couldn't just the inner flap that opens be made to accommodate the 7800 board? The outer dust cover that slides back need only have the two notches cut out (easy enough) for the wider 7800 board.
Would it be cheaper just to make that part? And then we can use 2600 cases again, and just replace the inner flap and cut the two notches out of the dust cover.
Thoughts?
Bob
Attached Thumbnails
#3 OFFLINE
PacManPlus
-
-
- 3,320 posts
River Patroller
- Location:Naples, Florida
Posted Mon Nov 28, 2011 6:51 PM
Hey Ken! Hope all is well. 
The inside of those are very different than the old 2600 cases unfortunately, and they are *very* hard to come by.
Although the way to go may be to make a one-piece door like that to replace the one in the 2600 cases. It would have to consideration the type of spring that's in them, but it could be done.
Thanks,
Bob
The inside of those are very different than the old 2600 cases unfortunately, and they are *very* hard to come by.
Although the way to go may be to make a one-piece door like that to replace the one in the 2600 cases. It would have to consideration the type of spring that's in them, but it could be done.
Thanks,
Bob
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
