12 replies to this topic

[SteveW]

I went to a thrift store that had a Rastan for $50. The guy there told me that the former owner said that it's motherboard was good, but there was some kind of bad monitor connection or something. I'm just wondering - do you think it would be worth my time? I always liked the game, but I don't have hardly any experience with repairing electronics.

So, how difficult is it, restoring old arcade games? I know a lot of you have a lot of experience under your belts. Any advice?

[-^Cro§Bow^-]

I would probably grab it as long as the cabinet was in good shape. Because even if you didn't get Rastan working again, you could probably turn it into something else hopefully and still have some arcade game of some sort!

[SteveW]

Yeah, that's what I was thinking too. Maybe turn it into a MAME cabinet or something. I hate to destroy the old arcade game, though. I'd much rather get it working again. But I don't know what's really wrong with it. Plus, I doubt I could fit the machine in the back seat of my Neon, either. I'm going to have to arrange some kind of deal with someone who owns a truck.

But back to the question. How difficult is repairing an arcade game for a newbie?

[mos6507]

Rastan is a great game, but the board is relatively easy and cheap to acquire, and since it's JAMMA it should fit into any generic cabinet. So don't feel like you'll never come across one again.

[Starscream]

Depends on what you are repairing decides the difficulty. Monitors can be rebuilt to a degree or refreshed and you could do it yourselfif you are willing to take the time. For the most part, you need a multimeter to analyze any problem. A few simple tests and a few minutes of your time and you can usually narrow down the ailiment. Truthfully, unless the board is rare, expensive, or has sentimental value to you, it would be far easier to replace it in alot of cases. That is unless, you wanna have the knowledge and take the time to teach yourself. Worst case ya need to but a monitor say, that'll set ya back a few hundred and that would be the most major expense. I'd say jump om it. Cassidy Nolan is the man at repairing this stuff so if ya get it, I'd say post the problems here as I am sure he can help.

[SteveW]

I think I might just have to get it. I called my brother tonight and mentioned the game, and he offered to help me try to fix it. He and I should have the equipment to fix it, because we have our father's tools and gear (he used to be an avionics engineer). And my brother has a pickup truck to move the thing.

Here's another question: should it be moved standing up or flat?

[Starscream]

I always haul mine laying down. Be careful and don't throw it around I always use like a twin bed foam matress thingy, lay it in the bed of the pickup and set the game on top of it. In your case, it doesn't work so screw it, haul it any old way

[sebastius]

It sounds like either a bad monitor or a bad cable. But heck, it may also be a bust power supply or even a broken Color Prom (the babies that actually turn bits into colors)

But it sounds like an easy fix, one way or the other. Just be calm while working on it and try to obtain the schematics for the game.

[goatdan]

Watch out -- if it is a bad monitor, you're looking at a $200+ repair

It makes that $50.00 Rastan worth $250.00+ suddenly, and you might be better off trying to purchase something at auction.

[sebastius]

goatdan said:

Watch out -- if it is a bad monitor, you're looking at a $200+ repair    

It makes that $50.00 Rastan worth $250.00+ suddenly, and you might be better off trying to purchase something at auction.

Nope, just get a second hand working monitor, or if it's only a blown transistor or capacitor, it just might be an easy fix. Unless Rastan is a Vector game...

[Brian D. Deuel]

Chances are it has an Electrohome G07 or Wells-Gardner 4600 or 4900 series monitor that's seen better days, and needs a cap kit.

What is a cap kit? It's a package of new capacitors that replace the old ones on a monitor chassis. This generally solves a lot of problems with older monitors, although in the G07's case, I'd just go for a whole rebuild kit (around $35 last I remember) and replace the flyback, regulator, and the capacitors.

If it turns out to be the game PCB, you can find another Rastan (or another horizontal game with similar controls.. it's a JAMMA if I'm not mistaken) fairly cheap on eBay.

I'm not sure that there's a dedicated Rastan cabinet. Chances are, it's probably an old game converted to Rastan.

Everything you need to know about recapping a monitor can be found at this URL: http://www.alsarcade.com/capkit.htm

Good luck. $50 is a good price for that particular game.

Brian

[SteveW]

I'm beginning to have second thoughts about getting the game. I don't really have a lot of room for it. And I have no idea when i'll have access to a pickup truck to go get it. I might have to store it in my brother's garage, if he'll let me.

[SteveW]

Crud. I finally got someone with a truck to help me get the game, and when we got to the store, found out that it was already sold. I was really looking forward to getting it.