I've got an Atari Black Widow that I'm having problems with. My brother and I recently got it working after replacing one of the main power capcitors. The problem is that when the spiders and bugs appear there is a faint line that follws them for the entire time they are on the screen. I'm sure something just needs adjusting (I hope) but I don't know where to start. Anyone have any suggestions or solutions I can try to fix this?
0
Black Widow Graphics Question... Help!
Started by Lifeguard, Apr 2 2004 2:36 AM
2 replies to this topic
#1 OFFLINE
Lifeguard
-
-
- 78 posts
Star Raider
- Location:Near San Francisco, CA
Posted Fri Apr 2, 2004 2:36 AM
#2 OFFLINE
Cassidy Nolen
-
-
- 2,725 posts
River Patroller
- Location:Virginia, Just south of DC
Posted Fri Apr 2, 2004 7:41 AM
Turn down the brightness on the monitor a bit. See if it goes away. If not, I would reseat the eproms on the PCB. I had a similar condition on my Star Wars cockpit, and I reseated the chips for the fix. HTH
Cassidy
Cassidy
#3 OFFLINE
Max-T
-
-
- 516 posts
Dragonstomper
- Location:Texas
Posted Sun Apr 4, 2004 11:48 PM
Is the line that follows brighter or darker than the background? I've heard that this can be a problem with vector monitors, but if the trouble only started after replacing a part outside of the monitor, there may be another culprit.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
