Are there RAM expansions out there that will bring the XEGS to at least 128K that will work with the MyIDE interface? I am currently in talks with Benjamin Heckendorn to produce a 2nd Atari XE laptop, but I wanted to beef up the memory a bit, and wondered if this would cause problems that we needed to be aware of?
-Thom
1
Atari XEGS, MyIDE, and RAM expansions
Started by tschak909, Jun 2 2006 12:11 AM
3 replies to this topic
#2 OFFLINE
MEtalGuy66
-
-
- 2,356 posts
River Patroller
- If it aint broke, fix it anyway!
- Location:Houston, TX, USA
Posted Fri Jun 2, 2006 12:17 AM
tschak909, on Fri Jun 2, 2006 1:11 AM, said:
Are there RAM expansions out there that will bring the XEGS to at least 128K that will work with the MyIDE interface? I am currently in talks with Benjamin Heckendorn to produce a 2nd Atari XE laptop, but I wanted to beef up the memory a bit, and wondered if this would cause problems that we needed to be aware of?
-Thom
-Thom
Naah. The MyIDE shouldnt be effected by, or effect any sort of extended ram scheme I can imagine on an ATARI 8-bit.
Contact Mathias Von Nisselroy about his XEGS ram expansion. Hes got a fully functional design, and is well aware of the hardware specifics involved.
#3 OFFLINE
tschak909
-
-
- 161 posts
Chopper Commander
- Location:USA
Posted Fri Jun 2, 2006 1:07 AM
pm'd MEtalguy66
#4 OFFLINE
Mathy
-
-
- 1,167 posts
Stargunner
- Location:Heerlen, NL
Posted Fri Jun 2, 2006 11:17 AM
Howdy MetalGuy
It's Mathy van Nisselroy. You can read an article about my 1MB XEGS expansion here and check out the schematic here. (the doc's aren't finished)
Greetings
Mathy
MEtalGuy66, on Fri Jun 2, 2006 7:17 AM, said:
Contact Mathias Von Nisselroy about his XEGS ram expansion. Hes got a fully functional design, and is well aware of the hardware specifics involved.
It's Mathy van Nisselroy. You can read an article about my 1MB XEGS expansion here and check out the schematic here. (the doc's aren't finished)
Greetings
Mathy
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
