Goochman

Details and pictures here:
http://www.atariage....intendo-64-cib/

So this IIe I was given has a few cards that I cant find information - anyone know what these do:

MPC RAMTEXT - Is this an 80 column board?

MicroTek Q-Disk - Not sure what this does

Some Mircosoft Consumer Division card

Microtek Dumpling board is a printer card from what I could find

Pictures below

Ok,

So I got my CFFA3000 and want to start using it. IM an Apple newbie and figured Id ask some dumb questions here first before registering for the official board.

I have an Apple IIe that was given to me. I fired it up to play Ultima last year and have 2 disk drives connected to the drive card (I presume Slot 6).

Reading the CFFA guide it talks about using Slot 6 or 7 and impact for Hard drive emulation, etc.....

I presume I can remove my current Disk card in slot 6 and put the CFFA3000 in Slot 7 - therefore I will be able to emulate 2 disk drives like it was in Slot 6 and also a Super Image (hard disk) which would be in Slot 7 correct?

Ive also read that the Thumb drive or CF Card must be in FAT32 format - Can I have both attached at the same time or do you need to use a CF or a Thumb Drive?

Ive read that subfolders are not supported so all images must be on the root of the card?

Anything else whacky with installing/running this I should know? Im basically loading .DSK images on to a CF card at first though forsee using a USB Thumb Drive later with an extension so I can make change easily.

So I finally got a Spectre GCR (I had the Spectre cart previously).

Ive had trouble getting software transferred and didnt have any Mac disks - anyone have a suggestion/site to get Mac software? Id like to get the lastest System/Finder that worked with the Spectre series.

I dont suppose there is a way to generate 800k mac disks from a PC?

With some recent progress on the Jag emu scene I wanted to try some of the Jag games I ahve on my PC - unfort they are in .Jag format. Anyone have a util that can strip the header off these and turn them into .BIN files?